Follow these easy steps to get your AEG FAVORIT 88419 W0P Dishwasher up and running in no time.
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages.
Adjust the water softener to the highest level and ensure it agrees with the water hardness in your area. Contact your local water authority to know the water hardness.
Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt container (only for the first time). If the salt indicator is on, fill the salt container.
Press the release button to open the lid of the rinse aid dispenser. Fill the rinse aid dispenser. If the rinse aid indicator is on, fill the rinse aid dispenser.
Ensure the water tap is open to allow the appliance to fill with water.
The first time you use the appliance, make sure that there is no leakage.
Press the on/off button to activate the appliance. Ensure the appliance is in setting mode when all the programme indicators come on and the display shows two horizontal status bars.
Load the baskets with dishes. Refer to the supplied leaflet with examples of the load of the baskets. Only use the appliance to wash items that are dishwasher-safe.
Add the detergent to the compartment. If you use detergent tablets, put the tablet in the compartment. Close the lid and ensure the release button locks into position.
Set and start the correct programme for the type of load and the degree of soil. If using combi detergent tablets, activate the Multitab option.